Posted by: arbeam | October 1, 2015

Sep 17: Tour of USS Stennis CVN-74

110725-N-RG482-053 BREMERTON, Wash. (July 25, 2011) The Nimitz-class aircraft carrier USS John C. Stennis (CVN 74) departs Naval Base Kitsap. John C. Stennis is on its way to the western Pacific Ocean and the Arabian Gulf for a scheduled seven-month deployment. (U.S. Navy photo by Mass Communication Specialist 2nd Class Kyle Steckler/Released)

BREMERTON, Wash. (July 25, 2011) The Nimitz-class aircraft carrier USS John C. Stennis (CVN 74) departs Naval Base Kitsap.

On September 17, 2015 council members and guests were warmly welcomed for a tour of USS John C. Stennis CVN 74 in Bremerton. Some of us have toured the ship before but it is always a pleasure and privilege to return. And this time was no different.

Stennis OrdnanceAfter an initial briefing and Q&A session in one of the 3 huge hangar bays, during which time we watched contractors and members of the crew doing the work necessary to keep Stennis ready, we moved on to an area of the ship that we had not previously seen…ordnance. We first went to Ordnance Control where the storing, moving, building and issuance of all ordnance is handled as directed. The OHO (ordnance handling officer) must be qualified and certified, There are 5 ordnance divisions served by 9 elevators used to move ordnance to the flight deck for attachment to aircraft.

From Ordnance Control we went down several decks to one of the magazines where ordnance is stored, built and handled. Although there was no live ordnance on board at this time there was an amazing display of inert rockets, bombs and missiles to show examples of the weapons carried. Each is essentially a basic unit to which components are added at both ends to customize it for a particular mission. Anything from totally unguided to essentially pin point accuracy can be built as directed in minutes. While there we also saw a display of small arms (rifles, pistols and machine guns) that are used when required. It is interesting to consider that munitions we recently saw at Naval Magazine Indian Island could wind up in a magazine aboard Stennis.

Stennis Commanding Officer Capt. Mike Wettlaufer joined us briefly at this point to welcome us aboard and tell us about the ship. He proudly noted that the ship and crew had successfully completed a quarter’s worth of underway training in just a month, including joint work with the Army and Air Force. Stennis will be going out for additional short sessions of readiness training and is standing by for deployment order.

Following our time with Capt. Wettlaufer, we went below again to room number 3 of 5 arresting gear engine rooms, another new tour stop for us. Each of the four arresting gear wires on deck, as well as the crash barrier, is connected to machinery in these engine rooms which is calibrated for each aircraft catch. The cable is controlled by huge air and hydraulic pistons. Room number 3 is usually the busiest as wire number 3 is the “target” for landing aircraft and is the one most used. During aircraft operations there are approximately 80 catches every day. A major improvement in what is otherwise immediately post WW II technology was the installation in 2006 of an electronic readout system that greatly simplified the calculations of required system settings for each aircraft landing.

Commander Third Fleet visiting USS Stennis

Commander Third Fleet visiting USS Stennis

Our last tour stop was a familiar one, but still a most interesting one, Flight Deck Control. Here WWII era “technology” is also used on the ouija board manual deck layout and tracking arrangement. It still works using small cut out scale models of the various aircraft types and additional pieces as simple as nuts and push pins to designate location and status. Aircraft handlers, elevator operators, and other flight deck personnel wear different colored jerseys to designate their function on deck. Yellow, blue, green, purple, brown, red and white are used. Most active aircraft are either in flight or stored on deck. Usually only those requiring repair or maintenance are sent below. It is hard to imagine what it must be like on a dark, stormy night in blackout conditions during flight operations. But this is what they do, and they do it well.

NL Stennis Tour 091715

We left Flight Deck Control and reassembled in the Ward Room where we enjoyed a great lunch from the ship’s galley.   Disappointingly the ship’s store was not open at this time so we headed back down to the pier and returned to our cars concluding this great tour. We should all be proud that USS John C. Stennis and crew are serving us at this critical time. Our thanks to them for their service and the tour. And as always thanks to Byron Faber for putting it all together. -Norman Marten


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: